1
/
of
1
New Daiichi Seiko Rod Holder Lark Rod Holder 2500 01036 Black !
New Daiichi Seiko Rod Holder Lark Rod Holder 2500 01036 Black !
Regular price
¥35,300
Regular price
Sale price
¥35,300
Unit price
/
per
Taxes included.
Couldn't load pickup availability
Lark 2500 boat edge -based fixed type Black /DX Large fish compatible /01036 Size: DX Large fish compatible PatternName: RAKU 2500 Fixed Base Type Package Number of Packages: 1
・Support rod diameter: 1.3 inches (32 mm)
・Compatible Harris up to approximately No. 12
・Rod holder body drill bolt rubber gasket base 2.7 x 4.5 x 0.7 inches (68 x 114 x 17 mm)
The traditional series has been added to the sharpness and rapid drop function. This is a dedicated rod holder for cruiser motorboats that inherit the features of Shakra'. The rod (tip of the head) can be turned downward to allow for smooth line removal when loading reducing backlash and allowing for rapid drop straight down to the tanna. (suitable for middle rods). You can also keep the rod at the waist height. Change the style to normal style with the operation of the lever switch. Installation Method 1 Place the base of 1 rake 2500 on the boat and mark the 4 places of the base mounting hole with a pencil. Drill the 21 mark with the included drill and pinch the rubber seal and secure the base with the tapping screw. Installation Method 2 When setting the 3A rod holder to the base simply pull the built-in set pin and insert the base insert into the base then put the built-in set pin back to complete the set. 4. 45 degree oscillating left and right. If the rod holder is not in use please remove and store it.
・Support rod diameter: 1.3 inches (32 mm)
・Compatible Harris up to approximately No. 12
・Rod holder body drill bolt rubber gasket base 2.7 x 4.5 x 0.7 inches (68 x 114 x 17 mm)
The traditional series has been added to the sharpness and rapid drop function. This is a dedicated rod holder for cruiser motorboats that inherit the features of Shakra'. The rod (tip of the head) can be turned downward to allow for smooth line removal when loading reducing backlash and allowing for rapid drop straight down to the tanna. (suitable for middle rods). You can also keep the rod at the waist height. Change the style to normal style with the operation of the lever switch. Installation Method 1 Place the base of 1 rake 2500 on the boat and mark the 4 places of the base mounting hole with a pencil. Drill the 21 mark with the included drill and pinch the rubber seal and secure the base with the tapping screw. Installation Method 2 When setting the 3A rod holder to the base simply pull the built-in set pin and insert the base insert into the base then put the built-in set pin back to complete the set. 4. 45 degree oscillating left and right. If the rod holder is not in use please remove and store it.
Share
